20.1. THOR 10.7 (Techpreview)

20.1.1. THOR Version 10.7.14

Type	Description
Feature	New --max-reasons flag to limit the shown number of reasons per message. This flag replaces --allreasons, which will still work, but is now deprecated.
Bugfix	Fix an issue where the 32-bit version of THOR for Linux crashed when loading the signatures
Bugfix	Fix an issue where large /etc/hosts files could cause extremely long scan times
Bugfix	Fix an issue where entries in /etc/hosts that mapped multiple hostnames to the same IP address could cause hard-to-read log entries

20.1.2. THOR Version 10.7.13

Type	Description
Feature	New --max-hits flag to limit the number of hits per IOC or YARA rule
Feature	--eventlog-target now supports '*' as a target
Change	Memory dump files are now scanned with process memory YARA rules rather than the default YARA rules
Change	Update to Golang v1.20.13
Bugfix	--lab --collector now activates the artifact collector, as intended
Bugfix	Fix an issue where THOR could crash during initialization
Bugfix	Dataless files on MacOS are now ignored
Bugfix	Fix an issue where some network drives on Linux were scanned even if --alldrives was not activated
Bugfix	Fix an issue where THOR for Linux could crash in the 'Crontab' module
Bugfix	Fix an issue where some eventlogs could cause a crash in the 'Eventlog' module
Bugfix	Fix an issue where, if an error occurred when reading a file, incorrect file hashes were displayed

20.1.3. THOR Version 10.7.12

Type	Description
Bugfix	Fix an issue where a high number of mutexes could cause a crash in THOR

20.1.4. THOR Version 10.7.11

Type	Description
Bugfix	Fix an issue where THOR could hang when scanning specific processes on Linux

20.1.5. THOR Version 10.7.10

Type	Description
Feature	New --nommap flag to disable memory mapping in features
Change	Remove action feature due to potential abusability
Change	Update to Golang v1.20.10
Change	SFX RAR executables are now extracted using the Archive feature instead of the ExeDecompress feature, which allows access to the filenames within the archive
Bugfix	Fix an issue where too many open handles on a system could cause a crash
Bugfix	Fix an issue where a scan exit due to the Rescontrol could cause a deadlock
Bugfix	Ensure that data is truncated, even if match strings are unusually large
Bugfix	Fix an issue where the EtwWatcher could crash when finishing

20.1.6. THOR 10.7.9

Type	Description
Change	CPU limit now applies only to full system CPU usage, not only THOR (reverts a change made in 10.7.4)
Change	If THOR is cancelled by the Rescontrol feature, the information is now displayed as an Error instead of a Warning
Change	Standardized logging of matches on processes
Change	Update to Golang v1.20.6
Change	Update to YARA v4.3.2
Bugfix	Fixed an issue where simultaneous write access from another process to a file that THOR scanned could cause the THOR scan to fail
Bugfix	Fixed an issue where old Windows systems could incorrectly be displayed as unpatched
Bugfix	Fixed an issue where 'thor-util update' could remove the file type signatures

20.1.7. THOR 10.7.8

Type	Description
Feature	(via THOR Util) log conversion to CSV is now possible
Feature	New Artifact Collector module, which allows collection of forensic artifacts from the current system into a ZIP file
Feature	New --print-signatures-json flag for JSON output of current signatures
Feature	New --init-selector and --init-filter flags which allow the user to load only a subset of the normal signatures
Change	When using --encrypt, log files are now encrypted as they are written during the THOR scan. This prevents temporary log files, but also makes generation of HTML reports afterwards impossible. Use THOR Util instead to generate HTML reports after decrypting the logs.
Change	Display matches on reverse lookup IP addresses in a better way
Change	Update to Golang v1.20.5
Change	Update to OpenSSL 3.0.9
Bugfix	Display error messages correctly in JSON logs
Bugfix	On Linux, don't skip directories with children where lstat() fails

20.1.8. THOR 10.7.7

Type	Description
Change	THOR Lite licenses with Sigma now also have the Eventlog and EVTX modules enabled

20.1.9. THOR 10.7.6

Type	Description
Feature	Add --minimum-sigma-level to specify which Sigma rules should trigger a finding. This defaults to high and is reduced to medium in intense mode, which is the current behaviour.
Feature	Add --audit-trail for detailed log output of THOR scan trails. This feature is experimental so far, and the output and output format may yet change.
Feature	Add --background to adjust THOR log level colors to specific backgrounds. Currently, optimizeds for dark and light backgrounds are available.
Feature	Add --jsonv2 which changes the JSON output to better reflect the structure of the log entry, with substructures now properly representing parts of the log entry. This also affects Thunderstorm responses when set.
Change	Increased default value for --yara-stack-size to 32768
Change	Standardized logging of filename IOC related reasons
Change	Update to Golang v1.20.2
Bugfix	Fix an issue where THOR scans failed due to a perceived symlink loop in the scan path

20.1.10. THOR 10.7.5

Type	Description
Feature	Add new ETL feature for parsing ETL files
Feature	Add --vtkey, --vtmode, and --vtaccepteula flag for integration of VirusTotal in THOR
Feature	Improve progress reports when scanning complex files
Feature	Support Sigma scans with THOR Lite for specific licenses
Change	Unify logging fields for many filename IOC, keyword IOC and YARA matches
Change	Unify logging fields for many messages in the NetworkShares module
Change	Update to Golang v1.19.5
Change	Upgrade PE-Sieve to v0.3.5
Change	--print-signatures now silences the normal initialization output
Change	Use mimalloc for YARA allocations on Linux and MacOS
Change	Scanning network paths now requires a Lab license
Bugfix	Reduce log level for corrupt /etc/passwd entries from Notice to Info
Bugfix	Identify packed samples correctly with --customonly set

20.1.11. THOR 10.7.4

Type	Description
Feature	New OLE feature for extraction of Office macros
Feature	ExeDecompress feature is now also supported on Linux
Feature	Added --lowioprio flag for lowered IO priority
Change	Update to Golang v1.19.2
Change	CPU limit now applies only to THOR's CPU usage, not the the complete system
Change	Windows Access Groups (e.g. in file permissions) are now always displayed in English
Change	Modified the scoring formula to further reduce the impact of multiple subscores on the full score. As compensation, the default threshold for alerts has been reduced.
Bugfix	.lnk file processing with --virtual-map no longer causes link targets to be scanned without applying the virtual mapping
Bugfix	Access faults while reading memory mapped files no longer cause THOR to crash
Bugfix	Panics on opening an archive are now handled properly

20.1.12. THOR 10.7.3

Type	Description
Feature	Meta rule matches with 'FORCE' tag will now cause THOR to ignore the maximum file size for that file
Feature	Improved matching behaviour of YARA rules on bulks. Scans on bulks (but not scans on single bulk elements) will now use a different YARA ruleset where common false positive constructs (e.g. filesize) are removed.
Feature	Improved performance in cases where a rule or IOC matched on a bulk
Feature	Improved memory usage and performance of HTML report generation
Feature	THOR now issues a Notice or Warning for Office connection cache entries
Feature	THOR now scans archives (e.g. ZIP files) recursively. This changes how matches in subfiles of archives are reported.
Feature	Added '.cab' support in the 'Archive' feature
Feature	Added '.gz' support in the 'Archive' feature
Feature	Added '.7z' support in the 'Archive' feature
Feature	Added new 'EML' feature for scanning .eml files
Change	Increase amount of bytes scanned by meta rules to 2048
Change	THOR now prefers reading files via memory maps over using the file read API
Bugfix	Improved performance of Sigma rule loading
Bugfix	Fixed a bug where THOR scanned some files multiple times, possibly resulting in a loop

20.1.13. THOR 10.7.2

Type	Description
Feature	Process memory checks are now enabled on Linux and MacOS
Feature	Added a check on Linux for deleted executables
Feature	UTF-16 Log files are now parsed correctly
Change	Upgrade YARA to v4.2.1

20.1.14. THOR 10.7.1

Type	Description
Feature	Sigma rules are now applied to running processes on the system
Feature	New command line option '-follow-symlinks' that causes the FileScan module to follow symlinks.
Feature	Checking e.g. log lines from a file with YARA will now set the THOR external variables like 'filepath' appropriately
Feature	THOR now shows modules names where string matches were found if a YARA rule matches on process memory
Feature	THOR now shows a warning if low rlimits are detected
Change	THOR will now scan processes even in soft mode, with a maximum process size of 250MB.
Change	--max_file_size_intense is now deprecated. Instead, --max_file_size should be used.
Change	--virtual-map now supports mounts in subpaths on Windows, e.g. as --virtual-map G:\mount:C
Change	Upgrade PE-Sieve to v0.3.3
Change	Filescan progress report for folders without subfolders was improved

20.1.15. THOR 10.7.0

Type	Description
Feature	Mark files with names close to common Windows executables as suspicious
Feature	Change how score is added to avoid cases where scores added up to absurd values
Feature	Support scanning alternate data streams with --ads
Feature	Check environment variables of processes
Change	THOR now terminates if a positional argument was specified since none are expected
Fix	Scan files written to the Dropzone only once the write is complete (or does not continue for at least 1 second)